How to install....

You need:

• a Nullmodem cable with 9-pin Sub-D connector
• 9-pin Sub-D Gender changer male/male:
  
• A galaxis Box:
  
  ("Foto: galaxis technology ag")
• Hyperterminal or the GkWare galaxis downloader 

Using the downloader application is the recommended update method for unexperienced users. It contains on-screen step-by-step instructions for changing the box firmware. The following description might help you if you have problems or simply want more information about the upgrade progress. 

Download HowTo (Hyperterminal):

1. Connect one of your PC serial ports to your galaxis box using the nullmodem cable and the gender changer (other cables might fit, but they do not work).
2. Start Hyperterminal and open the serial port you connected the box to (115k2, no handshake)
3. Power-On your box
4. Quickly press "d" on the keyboard when you see a series of  dots
5. If you see "doun" in the front-display now proceed with step6, otherwise go back to step 3.
6. Select Transfer -> Send File
7. Select "1k XModem" in the Protocol field
8. Select "Browse" and open the downloaded firmware file
9. Press "Send"
10. You should see a download progress bar now.
    You should now UNDER NO CIRCUMSTANCES powerdown or reset the box until the download is complete and the new firmware has started.